November 11, 2026 · Bill Ferguson · Reviewed November 2, 2026
The Good, the Bad, and the Ugly: A Year of Missions...Graded
A buddy of mine flying drones as a side hustle while he waits on a federal job volunteered his full 2026 mission log for a public post-mortem. 64 mission trips, $17,021 billed, a first half and second half that look like two different pilots, and what Rotor Rate would tell him to change for 2027. Strap yourself in.. it’s a long one!
A note on how this post exists. Rotor Rate doesn't read user mission data. We don't open accounts, pull jobs, or profile pilots. This post exists because a buddy of mine who uses Rotor Rate volunteered his 2026 mission log for a public post-mortem: his jobs, his numbers, his permission. I'll call him "the operator." The steps to run the same audit on your own year are near the end.
He's a fellow veteran flying in the same Colorado market I do, and he runs every job through Rotor Rate before accepting. By his own admission, he spent the first half of the year taking jobs the calculator very politely told him not to take. D'oh!
Over a beer last week he asked me to run the whole year. Here it is: 64 mission trips from February 7th through November 7th, plus the gear he bought, the fuel he burned and the offers he turned down. One small $145 job is left before New Year's. It won't move the totals much.
Four terms first
They tripped up the operator, too. The example is his first RAAD trip, a $400 job:
- Cost of doing business (CODB): the cash it takes to fly the job, meaning gas and job expenses. About $123. Price below that and you're paying to work.
- Break-even: CODB, plus his rate for time on site and processing, plus part of his drive time. That rate comes from his Hourly Rate Builder, so it carries a slice of his gear, insurance, software and the take-home pay he wants. $347.
- Fair price: break-even plus the rest of his drive time. The full smash, shown as "Fair Rate" on the calculator. $489. By accepting it at $400, he shorted himself $89.
- Profit (what he pockets): the price minus CODB. About $277, wages included.
So in essence, when it reads "+$53 over break-even" it means $53 in addition to his wages, not just $53 in his pocket for the job. Hope that makes sense.
---
The side hustle question
He retired from the service with a pension and spent 2026 applying for a GS (federal civilian) position. The drone work started as extra money while federal hiring takes its time. On paper that's a side hustle. I'm grading it as a business anyway, because that's how he ran it.
The pension matters, though. It paid the household bills in the months the flying didn't, and it's why a slow April was a lesson instead of a crisis. Without a cushion like that, the first half would have hurt a lot more.
---
The scoreboard: all of 2026
| Metric | Result |
|---|---|
| Mission trips | 64 (62 paid jobs, plus 2 trips logged at $0 — one RAAD trip whose pay was booked on an earlier trip, one his own no-charge refly) |
| Total billed | $17,021 |
| Sum of break-evens (per Rotor Rate) | $15,700 |
| Sum of fair prices (per Rotor Rate) | $19,156 |
| Above break-even | +$1,321 |
| Left on the table vs. fair price | −$2,136 |
| Paid jobs below break-even | 19 / 62 (31%) |
| Paid jobs below fair price | 39 / 62 (63%) |
| Offers passed (Pass Log, June 21st – November 10th) | 67, about $11,900 in offered pay |
| Miles driven for missions | about 6,800 |
| Hours on site / hours driving | about 142 / 125 |
| Cash kept after gas, job costs and overhead, before gear | about $13,000 (details in the cash table below) |
The year-end totals hide the real story. Split the year in two:
| February 7th – June 20th | June 21st – November 7th | |
|---|---|---|
| Trips | 41 | 23 (21 paid jobs + 2 return trips at $0) |
| Billed | $7,848 | $9,173 |
| Above break-even | +$461 | +$859 (+$1,576 on the paid jobs alone) |
| Above break-even, per paid job | about $11 | about $75 |
| Paid jobs below break-even | 19 of 41 | 0 of 21 |
| Paid jobs below fair price | 30 of 41 | 9 of 21 |
| Average billed per paid job | $191 | $437 |
Parking the spreadsheet
Side by side, those two columns read like two different pilots. It was one pilot changing one habit.
Through about May he ran Rotor Rate on one screen and his homemade spreadsheet on the other. When they disagreed, or a quiet week made an open calendar feel louder than the math, his gut broke the tie. It's only an hour on site, and something beats nothing. That's how most of the spring's underwater jobs happened.
In late May he parked the spreadsheet and moved everything into the full product on a 60-day trial (we were running 7-day trials then; his is a big reason 60 days became the standard). One rule came with it: if the job doesn't clear break-even, don't take it. A few weeks later he started logging his passes.
Better clients and a busier season played a part, and I can't pin it on one change. But the rule and the Pass Log showed up right when the underwater jobs stopped. That's hard to call a coincidence.
Here's the year by platform:
| Platform | Trips | Billed | Break-even total | vs. BE | Below BE | Below fair | Billed per mile driven |
|---|---|---|---|---|---|---|---|
| FlyGuys | 21 | $5,606 | $3,959 | +$1,647 | 1 | 5 | $3.71 |
| Direct Client #2 (roofing) | 4* | $5,093 | $4,871 | +$221 | 0 | 2 | $3.57 |
| Zeitview | 23 | $2,409 | $3,032 | −$623 | 12 | 21 | $1.77 |
| Droners.io | 8 | $2,000 | $1,795 | +$205 | 2 | 5 | $1.93 |
| RAAD | 3† | $1,200 | $1,033 | +$167 | 0 | 1 | $1.19 |
| Eberl | 4 | $463 | $580 | −$117 | 3 | 4 | $1.43 |
| Direct Client #1 (media) | 1 | $250 | $430 | −$180 | 1 | 1 | $4.83 |
*Includes one return trip flown at no charge — a refly of his own miss, covered in The Ugly below. †Two missions, three trips. The second mission's pay and RAAD's payment for a wasted trip were booked together on the June 18th trip, so the July 1st trip that finished the job shows $0.
FlyGuys and one direct client carried the year. Zeitview and Eberl took a chunk of it back in the spring.
---
The Good
FlyGuys became the backbone. Twenty-one jobs, $5,606 billed, and one under break-even all year. In the second half alone: 12 jobs, $3,555, none under break-even, +$893. The standout was June 11th: a 2.5-hour mission and a 16-mile drive for $850 flat, against a $368 fair price.
RAAD: two missions, three trips, all paid. The site is about 211 miles from home. The first mission, in early June, paid $400. Two weeks later RAAD sent him back before the site owner was ready, owned the mistake and paid $400 for the wasted trip. On July 1st he flew the second mission for another $400. That's about $870 in his pocket after gas and job costs for roughly 19 hours of work, or about $46 an hour. Thin, but a network paying for its own scheduling miss is worth noting.
One of those drives doubled as a visit with a friend he hadn't seen in a couple of years, plus a morning at the Great Sand Dunes and a wildfire detour on the way home to Colorado Springs. The P&L calls it a thin margin. The other ledger calls it a pretty good couple of days.
Direct Client #2, a commercial roofing company. Three fall projects: one single-site job and two multi-site inspection runs of seven and eight buildings. $5,093 billed against $4,495 of break-even, each priced within $16 of Rotor Rate's fair price. One deliverable helped the client win an industry award, which can't hurt next time. The margins aren't flashy. The price was his, and it held.
The Pass Log. Sixty-seven offers declined from June 21st through November 10th: 45 Zeitview, 15 Droners.io, 3 FlyGuys, 3 Bees360 and 1 Eberl, about $11,900 in offered pay. Many were long drives where distance alone sank the math. Saying no didn't show up as income, but it kept days free for the roofing work and the better FlyGuys runs.
---
The Bad
The spring Zeitview run. Twelve of his 23 Zeitview missions came in below break-even, all between March and mid-June. He flew fourteen in April alone. In his words: "I was trying them out and figured why not get paid to build up some experience. That's actually a healthy way to look at some of the lower priced network jobs.. as long as you know that when accepting them. They seemed to have the most jobs in the greater vicinity at the time — few of the other networks had anything within 100 miles of home base."
Fair reasons. Call it trial-by-paycheck: local work, wanted reps, and a no that feels like closing a door you just opened. It also hands the network most of the leverage.
On April 8th he flew three Zeitview jobs a few miles apart at $104, $94 and $108. Even linked into one trip, the break-evens were $169, $94 and $142. Two lost money before he left the driveway; the third broke even almost to the penny.
How he flew them at all: chaining. Most of those jobs were in the Denver metro, 70 to 80 miles round trip, paying $80 to $196. One at a time, the drive eats most of the offer. So he stacked nearby jobs onto the same day and linked them in Rotor Rate as one trip, splitting the drive across the stops. Fifteen of his 23 Zeitview jobs were chained, across seven days, all before June 21st. From his records:
| Those 15 jobs | Each driven as its own trip | Chained |
|---|---|---|
| Round-trip miles | about 2,180 | about 970 |
| Hours behind the wheel | about 40 | about 18 |
| Combined break-even | about $3,370 | about $2,400 |
| Jobs under break-even | 15 of 15 | 11 of 15 |
| Billed | $1,714 | $1,714 |
Chaining didn't turn underpriced work into good work. It turned a $1,650 hole into a $700 one. He puts it more bluntly: it was about the only way to fly the jobs he'd said yes to without losing his butt. More in Drone Mission Chaining: When Multi-Stop Jobs Pay .
After June 21st he took five more Zeitview jobs, all short local flights at $70, and all five cleared break-even. Same network, different filter. A flat offer is often a starting point, too; some networks will bump the rate for a solid pilot who asks. Try: "Thanks. My floor for this asset is $X. Happy to fly it at that, and I understand if it doesn't fit." More in How to Say No (and Walk Away Without Burning the Bridge) .
Eberl, the experiment that didn't work. Four insurance-inspection missions, three under break-even. The low point was May 14th: $75 paid against a $161 break-even, closer to a donation than a job. Eberl's published rate card is more transparency than a lot of networks offer, but at his drive distances the lower tiers didn't cover his costs. Trade rate cards work better as a reference point than as a floor.
Sales tax out of his own margin. On the first two roofing invoices he folded Colorado sales tax into the price instead of adding it on top. That cost $193. The third invoice listed it separately, which is how the client expected it anyway.
---
The Ugly
The year's biggest misses, measured against break-even:
- October 2nd — a no-charge roofing refly, $0 billed, $376 break-even. He missed an area the client needed in more detail and went back on his own dime. A capture miss, not a pricing miss, and a cheap way to protect the client behind 30% of his year.
- June 17th — Direct Client #1 (media production), $250 paid, $430 break-even, −$180. He was the Remote Pilot in Command (RPIC, the person legally responsible for the flight under Part 107), but the company owner flew the drone. Rotor Rate has no job type for "I'm the legal pilot but I'm not flying," so he bent the inputs and got a verdict for a mission that didn't exist. Lesson: if the app doesn't model the work, quote your hourly RPIC rate instead of forcing it.
- April 2nd — Zeitview, $160 paid, $335 break-even, −$175. Nearly five hours on site and a 77-mile round trip for a flat $160. Ouch.
- April 19th — Zeitview, $196 paid, $342 break-even, −$146. Five hours on site, 80 miles round trip. Same shape. Again, ouch!
---
The whole year, cash in and cash out
The scoreboard grades each job. This asks a simpler question: did the business put money in the bank?
| Line | 2026 |
|---|---|
| Billed, 64 trips | $17,021 |
| Colorado sales tax absorbed on two invoices | −$193 |
| Fuel (estimated from trip miles and his truck's fuel economy) | about −$1,600 |
| Job expenses he logged (meals on mission days, ground-control supplies, a toll) | −$580 |
| Insurance, software, training, other overhead (his settings, not receipts) | −$1,621 |
| Cash ahead before gear | about $13,000 |
| Drone kit plus survey/GNSS equipment, bought in January | −$14,566 |
| Cash result for the year | about −$1,540 |
Year one paid back about 89% of the gear. Spread the gear over the three years his settings assume and the year comes out about +$8,170. That's roughly $31 an hour for time on site and behind the wheel, before any time at the desk.
About that gear bill
I can hear the first question: why drop $14,566 on gear in year one? Shelf prices, before tax and shipping:
| Gear, bought in January | Cost | How 2026 went |
|---|---|---|
| Matrice 4E, three spare batteries, props | $6,034 | In regular use |
| GNSS base station (Emlid Reach RS2+), tripod, tribrach and mounts | $2,995 | In regular use |
| Manifold 3 onboard computer and accessory kit | $2,098 | Hasn't earned a dollar |
| Emlid Reach RX2 rover, survey pole and quick-release adapter | $2,887 | Hasn't earned a dollar |
The first two rows are the price of admission. A good share of mapping and survey work asks for an enterprise airframe or RTK-grade accuracy (real-time kinematic, a correction method that typically gets positions within a few centimeters). Without that kit, those jobs aren't open to him.
The last two rows are the honest part. Capable tools, bought before he had the work, and they sat in the case all year. That's $4,985, about a third of the bill. Leave them out and the year moves from about −$1,540 to about +$3,445. He calls it "there were a couple bad buying decisions up front," and he's not wrong.
Spread over three years, the gear is about $4,855 a year, or about $34 per hour on site at this year's pace, before insurance, software or fuel. (I didn't count any resale value.)
To be fair to the critics: his best-priced work, the roofing jobs, was flown on an Air 3S he owned before 2026. So the takeaway isn't "don't buy the gear." It's the order of operations: find the work, then buy for it. Two questions help:
- Is there steady work within your radius that requires this gear? Not work you've heard about. Work you've seen offered.
- How many of those jobs does it take to pay it off? Put the purchase price into your Hourly Rate Builder before you buy, and Rotor Rate will show you what each quote has to carry.
One tax-time number, not cash: his roughly 6,800 business miles are worth about $5,020 as a mileage deduction at the 2026 IRS rates (72.5¢ a mile January–June, 76¢ from July 1st). That lowers taxable income. It doesn't put gas in the truck. More in The Mileage Deduction: How a 5-Minute Logging Habit Pays for Itself at Tax Time .
---
What Rotor Rate would tell him for 2027
- Fix the inputs before the rates. His Hourly Rate Builder counts $8,500 of gear against the $14,566 he actually bought, and it assumes 6 billable hours a week when he logged closer to 3. Correct both and his fixed costs per hour on site go from about $15 to about $46. The old settings priced that gap as profit.
- Keep the Pass Log habit. It lines up with the turnaround.
- Confirm the shot list before you leave the site. Two minutes on the coverage map beats a $376 drive back.
- Quote sales tax on top. It's the client's tax. The $193 was avoidable.
- Use dollars per mile as a quick screen. Sixteen of the 19 paid jobs under break-even paid less than $2.50 per mile driven. It's a gut check, not a rule; RAAD shows long drives can pay, sort-of. Under that line, run the full numbers and check whether it chains with anything nearby. Chaining can shrink a loss. It rarely fixes a rate that was too low to begin with.
- Grow direct work, one client at a time. The roofing client was 30% of the year's billing. Great client, still one phone call away from a very different year.
- Counter flat offers. In the spring he took the network's number on 17 of 18 Zeitview missions without countering.
---
The grade card
| Category | First half | Second half | 2026 |
|---|---|---|---|
| Saying no to bad offers | C | A | B+ |
| Pricing his own work (direct, Droners.io, RAAD) | B | B+ | B+ |
| Flat-offer networks (Zeitview, Eberl) | D | B | C− |
| Trip and tax terms (return trips, sales tax) | — | C | C |
| Using the verdict as a gate, not a suggestion | D+ | A | B− |
| Overall | C | B+ | B− |
---
What you can take from somebody else's year
This isn't a "Zeitview is bad" post. Eleven of the 23 Zeitview jobs cleared break-even, including all five in the second half; the missions in the spring didn't fit his drive distances. It isn't "Eberl bad," either. Shorter distances and tiered work (premium inspections) can work out well for some pilots. And to be clear, this isn't financial advice. Your costs, your radius and your income (pension or a W2 job) aren't his.
What it is: a pilot moving from using Rotor Rate as a calculator to using it as business partner. Break-Even is the floor. Fair Price is the goal.
It's also what a fairly ordinary first year looks like for a solo pilot, which is the point. For the first few months he didn't know his break-even number. To his credit he wrote everything down, at first in his spreadsheet then in Rotor Rate, course-corrected as he went and gained experience, and went after direct clients who pay his rates instead of relying solely on the networks. Rotor Rate helped, and we picked up a few fixes from a couple of snags his year turned up (solid feedback is very prized for us). Win-win!
To run the same self-audit on your own year (this one needs the full product):
- Open your Workspace and filter to the last 12 months of completed missions.
- Sort by Net to Bank, lowest first. The bottom of the list is your Ugly.
- For each one in the red, look at the verdict's Break-Even and ask: would a 10-second counter-offer have fixed this?
- Split the year in half and compare. If the two halves look very different, figure out what changed.
- Update your Hourly Rate Builder with what you actually bought and the hours you actually flew.
One offer vs. a whole year
The free calculator answers does this one offer make sense? using regional baseline rates, and that's often enough to spot a lowball. Most of what turned the operator's year around happened across many offers: his own rate settings, linked trips priced as trips, the Pass Log during quiet weeks, and actuals logged after each flight, so this post-mortem came from records instead of memory. The full product keeps all of that attached to the same jobs.
If you're newer and flying a handful of jobs, the free calculator may be all you need for a while. Once the work adds up to more than you can hold in your head, there's a 60-day trial. Either way, run your next offer through the numbers before you hit accept, on every job, everytime.
Until next time…
---
Sources & further reading
- Standard Mileage Rates.** Internal Revenue Service. Accessed 2026-11-10.
- FAA Part 107 — Small UAS Rule.** Federal Aviation Administration. Accessed 2026-11-10.
- Internal: Drone Mission Chaining: When Multi-Stop Jobs Pay
- Internal: How to Say No and Walk Away Without Burning the Bridge
- Internal: The Mileage Deduction: How a 5-Minute Logging Habit Pays for Itself at Tax Time
- Internal: Cheap Pilot vs. Craftsman: The Easy-Button Trap
- Internal: From Estimate to Reality: The 'Actuals' Button
- Free tool: Rotor Rate Pricing Calculator
Numbers in this post come from one Rotor Rate user's voluntarily shared 2026 mission log (February 7th – November 7th), expense records, mileage log, and Pass Log through November 10th, 2026, with all client, address, and identifying details removed. Fuel is estimated from trip miles; overhead comes from his rate settings. Trips unrelated to his drone business are excluded. Rotor Rate doesn't read user data. I ran this analysis only because he asked me to, and he reviewed the post before publication.
Related guides
Go deeper on the rest of the drone-pricing topic — same framework, different angle.
Swipe for 4 links →
How to Price Drone Services
The eight factors and bid formula behind every defensible quote.
Drone Photography Pricing hub
Real-estate, brand, and event photo rate ranges with the math behind each.
Drone Mapping Pricing hub
Per-acre rates, processing time, and how to tier large-area jobs.
Drone Inspection Pricing hub
Tower, roof, solar, and infrastructure inspection rate ranges.
Next steps
What to do once you have a number you trust.
Swipe for 2 links →